BRAND NEW COMES WITH 5 years warranty (after registration)
Features
| 8 channel, Digital, high power audio amplifier. Power Factor Correction, 2Ω operation, 2RU. 500/ch @ 4Ω, 250W/ch @ 8Ω, 500W 70/100V line |
|
|
|
|
|
|
Features
Power supply
- Redundant universal switch mode power supply up to 400VAC tolerant with Power Factor Correction
- Patented output filter with ripple cancellation network
- Low Inrush Limiting reduces AC inrush current, removing the need for expensive power sequencers
- Detachable AC mains cable with IEC C19/22.2 (16A for EU, 20 A for USA) socket
Protections
Fully protected circuit design with:
- Ac protection: shut down power supply when AC mains voltage is outside operating range
- Clip limiter: prevents severely clipped waveforms from reaching loudspeakers, while still maintaining full peak power output
- DC protection: protects against infrasonic signal at the outputs
- VHF protections: protects the loudspeakers against non audible, strong, non musical high frequency signals
- Short circuit protection: protects the amplifier from short circuit or other stressful events for the output circuits with automatic protection reset
- Long term limiter: protects the loudspeaker against steady long term RMS (non audio) signals, by reducing maximum output
- Thermal protection: output stages operating temperature up to 80 °C (176 °F)
- Temperature controlled continous variable speed fan, front to back airflow
General
- Fixed frequency switchmode output stage for high grade sound accuracy
- All models 2 RU for reduced rack cost and space
- Light weight - for easier racking and shipping: 14 kg / 30.8 lbs
- Standard Phoenix connectors: analog and digital input, audio outputs, aux supply, alarms and GPIO
- Remotely switchable double input (main and aux) per channel
Loudspeaker system configuration
- Direct drive either low impedance loads or 70V / 100V Hi-Z distributed lines
- Switchable 35Hz / 70Hz high pass filter per channel
- Mixed configuration with Lo-Z/Hi-Z systems possible
- Bridged mode, with low impedance, per channel pair
Alarms and GPIO
- General Purpose Input/Output alarm interfaces:
- dangerous DC in the output power signal
- thermal stress
- Configurable alarm contact NC/NO per channel
- Remote AUX input / MAIN input switch
- Remote ON/OFF switch
- PWS OUT connector providing up to 24VDC
| GENERAL |
| Output power per channel |
| Output power per channel |
450 W @ 2 Ω |
500 W @ 4 Ω |
250 W @ 8 Ω |
| Bridge mode |
900 W @ 4 Ω |
1000 W @ 8 Ω |
|
| Max output voltage / current |
| Max unclipped output voltage @8 Ω |
|
|
65 Vpeak |
| Current |
|
|
15 Apeak |
| AC MAIN POWER |
| Power supply |
Universal, regulated switch mode with PFC (Power Factor Correction) |
| Nominal power requirement |
|
|
100-240 V ±10%, 50-60 Hz |
| Operating voltage |
|
|
90 V – 264 V |
| Power consumption/current draw |
| Idle |
|
115 V: 47 W – 0.75 A |
230 V: 50 W – 0.7 A |
| 1/8 of max output power @ 4 Ω |
|
115 V: 740 W – 6.6 A |
230 V: 750 W – 3.9 A |
| THERMAL |
| Operating temperature range |
|
|
0° – 35° C – 32° – 95° F |
| Thermal dissipation* |
| Idle |
|
115 V: 160 BTU/h – 41 kcal/h |
230 V: 170 BTU/h – 43 kcal/h |
| 1/8 of max output power @ 4 Ω |
|
115 V: 801 BTU/h – 202 kcal/h |
230 V: 839 BTU/h – 211 kcal/h |
| 1/4 of max output power @ 4 Ω |
|
115 V: 1340 BTU/h – 338 kcal/h |
230 V: 1340 BTU/h – 338 kcal/h |
Dimensions 483 x 89 x 360 mm 19.0 x 3.5 x 14.2 in
Weight 14 Kg (30.8 lb)
Loading... Please wait...
